WLDH series horizontal screw belt mixer

Working principle of horizontal screw belt mixer

The horizontal screw belt mixer is driven by the inner and outer diameter screws installed on the mixing shaft to flip the material inside the drum, allowing the mixer to flip the material over a large area inside the drum. In terms of the structure of the mixer, the spiral is designed as an inner and outer, left-right opposite spiral. When the mixer is working, the inner spiral drives the material near the axis to rotate around the axis, and the axial direction is pushed from the inside to both sides. The outer spiral drives the material near the cylinder wall to rotate around the axis, and the axial direction is pushed from both sides to the inside, thus causing the material to circulate and shear mix inside the cylinder, achieving rapid and uniform mixing of the material in a short period of time.

Introduction to horizontal screw belt mixer

Under the feasibility factor, the mixing effect of the horizontal screw belt mixer is not affected by the size and density of the particles, and it also has a good mixing effect on viscous materials.

The smooth mixing process reduces the damage to fragile materials, and the installation of a flying knife structure also has a crushing effect.

The horizontal structure has a lower body height, making it easier to install.

In the mixing structure, the forward and reverse rotating screw bars are installed on the same horizontal axis, forming a low-power and high-efficiency mixing environment.

The horizontal screw belt mixer is mainly used for the production of putty powder and can also be used as an entry-level insulation mortar mixer.

Function selection of horizontal screw belt mixer:

Discharge method: manual, electric, and pneumatic

Main shaft sealing method: packing sealing packing+airtight sealing mechanical seal

Blender form: Bidirectional continuous screw belt, Unidirectional continuous screw belt, Bidirectional break type screw belt, Unidirectional break type screw belt

Drive mode: Direct coupled split type (belt/chain)

Mixing machine material: Carbon steel material in contact with stainless steel (SS304/SS316), all stainless steel (SS304/SS316), internal coating

Spindle: single-stage and multi-stage

Cylinder opening: standard flange opening, quick opening feeding port, dust collector port, manual feeding port, side cleaning door

Discharge valve: butterfly valve, ball valve, plum blossom valve, flap valve

Others: liquid spraying/spray heating/cooling dedusting/temporary vacuum sampling