GFG series high-efficiency boiling dryer

Principle:

After being heated and purified, the air is introduced from the bottom by the induced draft fan and passes through the hole plate of the hopper. In the studio, fluidization is formed through stirring and negative pressure, and the water evaporates rapidly and is carried away by the exhaust, resulting in rapid drying of the material.

Application:

Mechanical screw extrusion of particles, swinging particles, wet high-speed mixed granulation particles.

Drying of wet granules and powdered materials in the fields of medicine, food, feed, chemical engineering, etc.

Large particles, small pieces, sticky block granular materials.

Materials such as konjac and polyacrylamide that undergo volume changes during drying.

characteristic:

The fluidized bed has a circular structure to avoid dead corners.

The hopper is equipped with mixing to avoid the aggregation of wet materials and the formation of channel flow during drying.

● Adopting tipping and dumping material, it is convenient, fast and thorough, and an automatic feeding and discharging system can also be designed according to requirements.

Closed negative pressure operation, gas is filtered. Easy to operate and clean, it is in line with the requirements of; GMP” Ideal equipment required.

The drying speed is fast, the temperature is uniform, and the drying time for each batch is generally 20-30 minutes.

Technical parameter table: